Tap the product this proposal is for. Vinyl or aluminum is set by the product, not asked again.
Work down the list — yellow means still to answer
Under an existing roof: no corner posts and no roof. Each wall runs between the existing posts, or from the house wall to a post — F‑channel at the post, U‑channel + fill at the house.
A and C are the side walls off the house. B is what you're aiming for — pick the exact no-fill width below.
Closest full-glass widths to your number, fewest units first. Tap one to use it.
Lays every wall out from the ladder. B snaps to the closest no-fill width. Press it again any time you change the size.
The transom sets the wall height.
Sets every window at once; each window card in the drawing area can still be switched on its own.
Pitch sets the roof panel length. The program picks the roof thickness from Craft-Bilt’s span chart for the town’s snow load.
Tap a roof panel to put a skylight in it — the numbers match the circles on the plan view.
Envy Home Services, Inc. · Sunrooms by Envy
New room
Proposal drawing
Not for construction ·
New room
Work down the yellow list. The drawing appears here once Measurements is answered and Build all three walls is pressed.
Elevations are drawn from outside looking in, to scale within each wall — the house is on the left of A and on the right of C. Fill sits at the house on A and C; the B wall is chosen so it has none.
Drag to turn the room · pinch or scroll to zoom
Unit widths come from the Betterliving layout sheets; frame deductions are the manuals' extrusion widths (aluminum p59–61, vinyl p49–50/153) with Bill's house-end method. Doors need at least 57" (aluminum) or 59.5" (vinyl). Windows are sliders; X is the sash that moves.
